Schneider Electric Altivar 32 Manuel d'installation télécharger pdf (Page 128)

CIP Objects

128

S1A28701 03/2010

Supported Instance Attributes

(1) If set option board parameter OBP:FDRU=0 will also be set to implicitly disable the FDR mechanism on the DHCP

protocol. This to be compatible with CIP tools that has configured the device to operate in a non-FDR specific

environment. The user has to manually enable the feature if desired to be used.

Attribute

Access Name Data type Details

1 Get Status DWORD 0 = The Interface Configuration attribute has not been

configured

1 = The Interface Configuration attribute contains valid

configuration

2 Get Configuration

capability

DWORD Bit 0 = 1 (TRUE) shall indicate the device is capable of

obtaining its network configuration via BOOTP

Bit 1 = 1 (TRUE) shall indicate the device is capable of

resolving host names by querying a DNS server

Bit 2 = 1 (TRUE) shall indicate the device is capable of

obtaining its network configuration via DHCP

Bit 3 = 1 (TRUE) shall indicate the device is capable of

sending its host name in the DHCP request

Bit 4 = 1 (TRUE) shall indicate the Interface Configuration

attribute is setable.

Bit 5-31: reserved

3 Get/Set Configuration

control

DWORD Bits 0-3 Start-up configuration

0 = The device shall use the interface configuration values

previously stored

1 = The device shall obtain its interface configuration values

via BOOTP

2 = The device shall obtain its interface configuration values

via DHCP upon start-up

(1)

3-15 = Reserved for future use

Bit 4 = 1 (TRUE), the device shall resolve host names by

querying a DNS server

Bit 5-31: reserved

4 Get Physical Link Object STRUCT of

UINT

EPATH

Path Size

Path: Logical segments identifying the physical link object

Example [20][F6][24][01]: [20] = 8 bit class segment type;

[F6] = Ethernet Link Object class; [24] = 8 bit instance

segment type; [01] = instance 1

5 Get/Set Interface

Configuration

STRUCT of

UDINT

String

IP address (0: no address configured)

Network Mask (0: no Network mask configured)

Gateway address (0: no address configured)

Name server address (0: no address configured)

Name server address 2 (0: no address configured)

Domain Name

6 Get/Set Host Name String Read/write name of the drive

8 Get/Set TTL value USINT TTL value for Ethernet/IP multicast packets

9 Get/Set Mcast Config Struct Of. IP Multicast address configuration

Alloc Control USINT 0 - Use default allocation algorithm to generate multicast

addresses

1 - Multicast addresses shall be allocated according to the

values in Num Mcast and Mcast Start Addr

Reserved USINT Shall be 0

Num Mcast UINT Number of multicast addresses to allocate for EtherNet/IP

Mcast Start Addr UDINT Starting multicast address from which to begin allocation

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 140 141

Commentaires sur ces manuels

Pas de commentaire

Schneider Electric Altivar 32 Manuel d'installation Page 128

Commentaires sur ces manuels