Schneider Electric Magelis XBT GT Spécifications télécharger pdf (Page 88)

88 35010372 10/2010

F Auxiliary input/output/voice output interface (AUX). This interface is used for:

z External reset

z Alarm output

z Buzzer output

z Sound output

G Audio input interface (L-IN/MIC): this interface is used to connect a microphone

(use mini jack connector of 3.5 mm) (XBT GT4340 only).

H Video input interface: this interface is used to connect a video camera NTSC

(59.9 Hz)/PAL (5 0Hz). Use with the RCA convertor 75 Ω) (XBT GT4340 only).

I Power plug connector: the power cable is connected through this connector.

J Serial interface COM1: connects a RS232C or RS422-485 (serial) cable (from

the host/PLC) to the XBT GT (COM1 port).

K Serial interface COM2: connects a RS485 (serial) cable (from the PLC) to the

XBT GT (COM2 port).

L RS485 line polarization selector switch.

M Ethernet interface (10Base-T/100Base-TX) (except XBT GT2110/2220): RJ-45

connector is used, and the LED turns ON or OFF to indicate the current status.

z Green ON: data transmission available.

z Green OFF: no connection or subsequent loss of communication.

z Yellow ON: data transmission is occurring.

z Yellow OFF: no data transmission.

N USB host interface (USB1.1): connects a data transfer cable or peripherals or

PLC USB terminal port to XBT GT.

O CF card cover: covers the CF card slot. This cover must be closed when

accessing to the CF card (See Location of CF Card DIP Switches, page 112).

Part Description

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 245 246

Pas de commentaire

Schneider Electric Magelis XBT GT Spécifications Page 88