Schneider Electric Altivar 58 VW3-A58101 Manuel d'utilisateur télécharger pdf (Page 13)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 1 — Overview

Figure 3 (page 13) shows the location of the 50/60 Hz switch on the drive

controller. Before powering up the drive controller and using the

keypad display, you must set the 50/60 Hz switch to correspond with

the frequency of the incoming AC power.

Unlock and open the cover to access the 50/60 Hz switch on the control

board. If an option card is present, the switch may not be accessible

through the card. Set the switch to the position corresponding to the

frequency of the incoming AC power.

Figure 3: Location of 50/60 Hz Switch

50 Hz 60 Hz

50/60 Hz switch

green LED

red LED

cover

The nominal motor voltage (UnS) in the

3—Drive menu is initially configured by the

switch position:

For the 50 Hz Position:

-230 V, 50 Hz for ATV58••••M2

-400 V, 50 Hz for ATV58••••N4

For the 60 Hz Position (Factory Setting):

-230 V, 60 Hz for ATV58••••M2

-460 V, 60 Hz for ATV58••••N4

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 111 112

Pas de commentaire

Schneider Electric Altivar 58 VW3-A58101 Manuel d'utilisateur Page 13