Schneider Electric INTERBUS Basic Spécifications télécharger pdf (Page 33)

The STB NIB 2212 NIM Module

31004624 8/2009 33

You can also password-protect a configuration (see page 106). If you do this,

however, the RST button is disabled and you are unable to use it to reset the port

parameters.

Connections

An STB XCA 4002 programming cable must be used to connect the computer

running the Advantys Configuration Software or a Modbus-capable HMI panel to the

NIM through the CFG port.

The STB XCA 4002 is a 2 m (6.23 ft) shielded, twisted-pair cable with an 8-

receptacle HE-13 (female) connector on one end that plugs into the CFG port and a

9-receptacle SUB-D (female) connector on the other end that plugs into a computer

or an HMI panel:

TXD transmit data

RXD receive data

DSR data set ready

DTR data terminal ready

RTS request to send

CTS clear to send

GND ground reference

N/C not connected

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 169 170

Pas de commentaire

Schneider Electric INTERBUS Basic Spécifications Page 33