Schneider Electric INTERBUS Basic Spécifications télécharger pdf (Page 114)

Advanced Configuration Features

114

31004624 8/2009

Error Reporting

Each bit in register 45358 is used to report a global error condition. A value of 1 in

the bit indicates that a specific global error has been detected:

1 Fatal error. Because of the severity of the error, no further communications are possible

on the island bus.

2 Module ID error—a standard CANopen device is using a module ID reserved for the

Advantys STB modules.

3 Auto-addressing has failed.

4 Mandatory module configuration error.

5 Process image error—either the process image configuration is inconsistent, or it could not

be set up during auto-configuration.

6 Auto-configuration error—a module is not in its configured location, and the NIM cannot

complete auto-configuration.

7 Island bus management error detected by the NIM.

8 Assignment error—the initialization process in the NIM has detected a module assignment

error, possibly the result of at least one application parameter mismatch.

9 Internal triggering protocol error.

10 Module data length error.

11 Module configuration error.

12 Application parameter error.

13 Application parameter services or timeout error.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 169 170

Pas de commentaire

Schneider Electric INTERBUS Basic Spécifications Page 114