Schneider Electric Modbus Plus Network Bridge Multiplexer none Guide de l'utilisateur télécharger pdf (Page 16)

MBX Driver Help

Cyberlogic Technologies Inc. - 16 -

PCI Card

1. Verify that the MBX Driver software is installed.

Windows automatically detects and configures the PCI-85 when it is newly installed

in the system. For this process to work correctly, the MBX Driver must be installed on

your system before you install the card.

2. Turn off power and insert the adapter card into an empty PCI slot.

3. Turn the power back on.

During booting, Windows will detect that new hardware has been added and display

a Found New Hardware message with the PCI-85 (416NHM30030 or 416NHM30032)

name.

Note

If you do not see the Found New Hardware message after system reboot, check for the

Network Controller device (with a yellow exclamation point) under the Other Devices

branch of the Device Manager. Windows will create this device if you insert the card

prior to installing the MBX Driver software. If the Network Controller device is present,

uninstall it (right-click and select

uninstall

) and then select the

Scan for hardware

changes

from the

Action

menu.

4. When you are asked to connect to Windows Update, select

No, not this time.

5. Click

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 115 116

Pas de commentaire

Schneider Electric Modbus Plus Network Bridge Multiplexer none Guide de l'utilisateur Page 16