Schneider Electric Altivar 32 Manuel d'installation télécharger pdf (Page 34)

Installation

S1A28686 03/2010

Output installation

Plug-in output connector and EMC plate assembly fitting

On size A and B drives

The EMC plate and the plug-in output power and braking unit terminal are fitted inseparably together.

Input terminals are located on the top of the drive, see page 31

. Arrangement and characteristics of the power

terminals are given on page 36.

 Plug the output power terminal.  Insert the fixing and the grounding screws (print: plus minus HS type 2).

 Tighten to 1 to 1.5 N.m (8.9 to 13.3 lb.in). Cabling can be carried out with the connector mounted on the drive

or not.

Cabling will be easier if carried out in this order: brake (1), motor and ground (2). Lastly mount the bridge

intended to receive the control wires (3). See detailed cable arrangment in page 37

On size C drives

The EMC plate supplied in the package is fitted at the bottom of the drive, using 3 x M5 HS type 2 screws.

On size D drives

The EMC plate supplied in the package is fitted at the bottom of the drive, using 2 x M5 HS type 2 screws.

1 ... 1.5

8.9 ... 13.3

lb/i







fixing screws

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Schneider Electric Altivar 32 Manuel d'installation Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis électriques Schneider Electric Altivar 32