Schneider Electric NetShelter SX 42U Spécifications Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 34
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
NetShelter SX Cabinet - Installation and Customization Manual18
Install the Equipment
To install rack-mount equipment in the cabinet:
1U
7
6
5
ns0014a
1. Review the equipment manufacturers installation instructions.
2. Locate the top and bottom U-space on the vertical mounting rails. Every
third hole on the mounting rails is numbered to indicate the middle of a
U-space.
3. Install the cage nuts on the interior of the vertical mounting rail; then
install the equipment. (To remove a cage nut, squeeze the sides to
release it from the square hole.)
Installing cage nuts
Schneider Electric offers a cage nut hardware kit (AR8100) for
use with square holes.
Note: Install cage nuts horizontally, with the ears engaging the
sides of the square hole. Do NOT install cage nuts vertically with
the ears engaging the top and bottom of the square hole.
1. Insert the cage nut into the square hole by hooking one ear of the cage nut assembly through the far
side of the hole.
Note: Install the cage nuts on the interior of the vertical mounting flange.
2. Place the cage nut tool on the other side of the cage nut and pull to snap it into position.
Removing cage nuts
gen0188a
1.Remove any attached screw.
2.Grasp the cage nut and squeeze the sides to release it from the
square hole.
WARNING
TIP HAZARD
• This cabinet is easily tipped. Make sure you have secured the cabinet to the floor before installing
equipment.
• Install the heaviest equipment first and toward the bottom of the cabinet to prevent the cabinet
from becoming top-heavy.
• Do not extend equipment on sliding rails until you have installed 158 kg (350 lb) of equipment into
the bottom of the cabinet for stability or until you have installed the stabilizer plate or bolt-down
brackets. Do not extend more than one piece of equipment on sliding rails at a time.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
ns1768a
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Commentaires sur ces manuels

Pas de commentaire