Schneider Electric Modbus Plus Network Bridge Multiplexer none Manuel d'utilisateur télécharger pdf (Page 31)

Configuring the TSXCUSBMBP Driver

35011984 02/2006 31

Entering Routing

Paths into the

Routing Table

Use the following procedure to change an entry in the Routing Table:

Step Action

Select

Routing

from the top level menu on the TSXCUSBMBP Driver Interface window.

2 Select the entry to be changed in the table by left clicking on it (the entry will become

highlighted)

3 Enter the Modbus ID and the associated Modbus Plus Routing Path in the fields below

the table.

4 Click on the Update button to update that entry in the table. You will see the entry in

the table above change to the new values.

5 Repeat steps 2-4 for each entry to change in the Routing table.

Note: Clicking on the Close button will save all Routing Table entries and return to the

top level menu. The new Routing Table will take effect immediately.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 62 63

Pas de commentaire

Schneider Electric Modbus Plus Network Bridge Multiplexer none Manuel d'utilisateur Page 31