IP 67 passive splitter boxes 5
Telefast
®
, ABE9 splitter boxes
Presentation
ABE9 passive splitter boxes for M12 connectors make it possible to eliminate long
and difcult cabling operations. Due their modularity and their dimensions, they are
the ideal solution for a wide variety of customer applications.
Connection to the processing unit can either be made by connector or by multicore
cable of different lengths.
IP 67 protection allows these products to be used within processes or machines in
harsh environments (splashing water, oil, dust, etc.).
The splitter boxes, available in 4 or 8 channel versions, allow connection of up to 16
signals maximum, depending on the version (2 per channel).
The characteristics of splitter boxes ABE 9C12 are as follows:
Connection of sensors and actuators using M12, 5-pin connectors.
Modularity: 4 or 8 channels.
Fixing system and connection to the processing unit conforming to market
standards:
xing centres,
M23, 19-pin connector, enabling the use of pre-formed cables in order to reduce
installation time and the risk of error,
multicore cable, 5 or 10 metres long. The splitter box comprises a connection cover
tted with plug-in terminals, which provides considerable exibility for:
- the replacement of damaged parts,
- modication of cable length.
Base units ABE 9C12ppLpp enable the use of 2 separate commons which, for
example, can be used for the management of an emergency stop. This function is
accessible beneath the terminal cover using 2 removable links. If both links are
removed, the 2 supplies become independent.
The use of a Y-connector allows 2 signals to be connected to the same M12 channel
on the splitter box.
Example: splitter box ABE 9C1281 (8 channels) enables the connection of
16 signals to the processing unit.
The Y-connector is available in 2 versions:
M12-M12 for connection of two M12 connectors to a single M12 channel on the
splitter box,
M8-M12 for connection of two M8 connectors to a single M12 channel on the
splitter box.
b
b
b
v
v
v
b
b
Complete reference = Splitter box only + Connector with cable
ABE 9C1240L05 = ABE 9C1240M + ABE 9XCA1405
ABE 9C1240L10 = ABE 9C1240M + ABE 9XCA1410
ABE 9C1241L05 = ABE 9C1241M + ABE 9XCA1405
ABE 9C1241L10 = ABE 9C1241M + ABE 9XCA1410
ABE 9C1280L05 = ABE 9C1280M + ABE 9XCA1805
ABE 9C1280L10 = ABE 9C1280M + ABE 9XCA1810
ABE 9C1281L05 = ABE 9C1281M + ABE 9XCA1805
ABE 9C1281L10 = ABE 9C1281M + ABE 9XCA1810
Connector only
ABE 9CM12C
Description:
page 14502/3
Characteristics:
page 14502/4
References:
page 14502/5
Dimensions:
page 14502/6
Connections:
page 14502/7
Description:
page 14502/3
Characteristics:
page 14502/4
References:
page 14502/5
Dimensions:
page 14502/6
Connections:
page 14502/7
Description:
page 14502/3
Characteristics:
page 14502/4
References:
page 14502/5
Dimensions:
page 14502/6
Connections:
page 14502/7
Description:
page 14502/3
Characteristics:
page 14502/4
References:
page 14502/5
Dimensions:
page 14502/6
Connections:
page 14502/7
Presentation
5
14502-EN_Ver6.0.indd
1
2
3
4
5
6
7
8
9
10
Commentaires sur ces manuels